Toyota Corolla Hybrid 2019 Owner'S Manual Download Page 226

Page: 226 / 491

224

COROLLA HV_ 国瑞 _GE

4-5. Using the driving support systems

■

Lane departure alert function

When the system determines that

the vehicle might depart from its
lane or course

, a warning is dis-

played on the multi-information dis-

play, and a warning buzzer will

sound to alert the driver.

When the warning buzzer sounds,

check the area around your vehicle and

carefully operate the steering wheel to

move the vehicle back to the center of

the lane.
Vehicle with BSM: When the system

determines that the vehicle might

depart from its lane and that the possi-

bility of a collision with an overtaking

vehicle in the adjacent lane is high, the

lane departure alert will operate even if

the turn signals are operating.

: Boundary between asphalt and the

side of the road, such as grass, soil,

or a curb

■

Steering assist function

When the system determines that

the vehicle might depart from its
lane or course

, the system pro-

vides assistance as necessary by

operating the steering wheel in

small amounts for a short period of

time to keep the vehicle in its lane.

If the system detects that the steering

wheel has not been operated for a fixed

amount of time or the steering wheel is

not being firmly gripped, a warning is

displayed on the multi-information dis-

play and the function is temporarily

canceled.

WARNING

●

The vehicle is extremely tilted due

to carrying heavy luggage or having

improper tire pressure.

●

The distance to the preceding vehi-

cle is extremely short.

●

The vehicle is moving up and down

a large amount due to road condi-

tions during driving (poor roads or

road seams).

●

When driving in a tunnel or at night

with the headlights off or when a

headlight is dim due to its lens

being dirty or it being misaligned.

●

The vehicle is struck by a cross-

wind.

●

The vehicle has just changed lanes

or crossed an intersection.

●

Tires which differ by structure, man-

ufacturer, brand or tread pattern are

used.

●

Snow tires, etc. are equipped.

Functions included in LDA
system

COROLLA HYBRID_OM_General_OM12M44E

Summary of Contents for Corolla Hybrid 2019












































































































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands

Toyota Corolla Hybrid 2019, Owner'S Manual

Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands