Toyota Corolla Hybrid 2019 Owner'S Manual Download Page 342

Page: 342 / 491

340

COROLLA HV_ 国瑞 _GE

6-4. Other interior features

■

Using the wireless charger

Press the power supply switch

of the wireless charger.

Pressing the switch again turns the

wireless charger off.

When turned on, the operation indicator

light (green) comes on.

When the power switch is turned off,

the on/off state of the wireless charger

will be memorized.

Place a portable device on the

charging area with its charging

surface facing down.

While charging, the operation indicator

light (orange) will be illuminated.

If charging does not begin, move the

portable device as close to the center of

the charging area as possible.

When charging is complete, the opera-

tion indicator light (green) will illumi-

nate.

■

Recharging function



If a certain amount of time has

elapsed since charging com-

pleted and the portable device

has not been moved, the wire-

less charger will restart charging.



If the portable device is moved

within the charging area, charg-

ing will stop temporarily then

restart.

■

Operation indicator light status

: Depending on the portable device, the operation indicator light may stay illumi-

nated (orange) after charging has completed.



If the operation indicator light blinks

If an error is detected, the operation indicator light will blink (orange). Take the

appropriate measures according to the table below.

Operation indicator light

State

Off

The Wireless charger is off

Green (illuminated)

Standby (charging is possible)

Charging is complete

Orange (illuminated)

A portable device has been placed on the

charging area (identifying the portable device)
Charging in progress

COROLLA HYBRID_OM_General_OM12M44E

Summary of Contents for Corolla Hybrid 2019












































































































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands

Toyota Corolla Hybrid 2019, Owner'S Manual

Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands