Toyota Corolla Hybrid 2019 Owner'S Manual Download

Page: 10 / 491

COROLLA HV_ 国瑞 _GE

and/or brake pedal; and,

• How fast the vehicle was

traveling.

These data can help provide a bet-

ter understanding of the circum-

stances in which crashes and

injuries occur.
NOTE: EDR data are recorded by

your vehicle only if a nontrivial

crash situation occurs; no data are

recorded by the EDR under normal

driving conditions and no personal

data (e.g., name, gender, age, and

crash location) are recorded. How-

ever, other parties, such as law

enforcement, could combine the

EDR data with the type of person-

ally identifying data routinely

acquired during a crash investiga-

tion.

To read data recorded by an EDR,

special equipment is required, and

access to the vehicle or the EDR is

needed. In addition to the vehicle

manufacturer, other parties, such

as law enforcement, that have the

special equipment, can read the

information if they have access to

the vehicle or the EDR.



Disclosure of the EDR data

Toyota will not disclose the data

recorded in an EDR to a third party

except when:
• An agreement from the vehicle’s

owner (or the lessee for a leased

vehicle) is obtained

• In response to an official request by

the police, a court of law or a govern-

ment agency

• For use by Toyota in a lawsuit
However, if necessary, Toyota may:
• Use the data for research on vehicle

safety performance

• Disclose the data to a third party for

research purposes without disclos-

ing information about the specific

vehicle or vehicle owner

The SRS airbag and seat belt

pretensioner devices in your Toyota

contain explosive chemicals. If the

vehicle is scrapped with the airbags

and seat belt pretensioners left as

they are, this may cause an acci-

dent such as fire. Be sure to have

the systems of the SRS airbag and

seat belt pretensioner removed and

disposed of by a qualified service

shop or by your Toyota dealer

before you scrap your vehicle.

Scrapping of your Toyota

COROLLA HYBRID_OM_General_OM12M44E

Summary of Contents for Corolla Hybrid 2019












































































































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands

Toyota Corolla Hybrid 2019, Owner'S Manual

Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands