Toyota Corolla Hybrid 2019 Owner'S Manual Download

Page: 105 / 491

103

COROLLA HV_ 国瑞 _GE

2-1. Instrument cluster

Vehi
cle s

tatus

informati

on and indi

cators

: Select menu icons

: Change displayed con-

tent, scroll up/down the screen

and move the cursor up/down
Press: Enter/Set

Press and hold: Reset/Display

customizable items
Return to the previous screen
Call sending/receiving and his-

tory display

Linked with the hands-free system,

sending or receiving call is displayed.

For details regarding the hands-free

system, refer to the “Navigation and

Multimedia System Owner’s Manual”.

■

Display items



Speedometer display/Driving

range (4.2-inch display)



Fuel economy



ECO Accelerator Guidance/Eco

score

■

Speedometer display/Driving
range (4.2-inch display)



Speedometer display



Driving range

Displays driving range with remaining

fuel. Use the displayed values as a ref-

erence only.
This distance is computed based on

your average fuel consumption. As a

result, the actual distance that can be

driven may differ from that displayed.
When only a small amount of fuel is

added to the tank, the display may not

be updated.

When refueling, turn the power switch

off. If the vehicle is refueled without

turning the power switch off, the display

may not be updated.

■

Fuel economy

Use the displayed values as a refer-

ence only.

Average fuel economy (after

reset)

To reset the average fuel economy dis-
play, press and hold the

meter

control switch.

Current fuel consumption

Displays instantaneous current fuel

consumption.

Driving range

Displays driving range with remaining

fuel.
This distance is computed based on

Content of driving informa-
tion

COROLLA HYBRID_OM_General_OM12M44E

Summary of Contents for Corolla Hybrid 2019












































































































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands

Toyota Corolla Hybrid 2019, Owner'S Manual

Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands