Toyota Corolla Hybrid 2019 Owner'S Manual Download

Page: 172 / 491

170

COROLLA HV_ 国瑞 _GE

4-2. Driving procedures

Stop the vehicle completely.

Set the parking brake (



P.177,

178), and shift the shift lever to

Check the parking brake indicator is

illuminated.

Press the power switch.

The hybrid system will stop, and the

meter display will be extinguished.

Release the brake pedal and

check that “ACCESSORY” or

“IGNITION ON” is not shown on

the multi-information display.

Modes can be changed by pressing

the power switch with brake pedal

released. (The mode changes each

time the switch is pressed.)

NOTICE

■

Symptoms indicating a malfunc-
tion with the power switch

If the power switch seems to be oper-

ating somewhat differently than usual,

such as the switch sticking slightly,

there may be a malfunction. Contact

your Toyota dealer immediately.

Stopping the hybrid system

WARNING

■

Stopping the hybrid system in an
emergency

●

If you want to stop the hybrid sys-

tem in an emergency while driving

the vehicle, press and hold the

power switch for more than 2 sec-

onds, or press it briefly 3 times or

Summary of Contents for Corolla Hybrid 2019












































































































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands

Toyota Corolla Hybrid 2019, Owner'S Manual

Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands