Toyota Corolla Hybrid 2019 Owner'S Manual Download Page 144

Page: 144 / 491

142

COROLLA HV_ 国瑞 _GE

3-3. Adjusting the seats

: If equipped

Move the front seats forward.

(



P.141)

Stow the rear armrest. (



P.343)

Stow the rear center seat belt

buckle.

Lower the head restraints to the

lowest position. (



P.144)

Fold the seatback down while

pushing the seatback lock

release button.

Each seatback may be folded sepa-

WARNING

●

Manual seat only: After adjusting

the seat, make sure that the seat is

locked in position.

NOTICE

■

When adjusting a front seat

When adjusting a front seat, make

sure that the head restraint does not

contact the headliner. Otherwise, the

head restraint and headliner may be

damaged.

Rear seats (folding

type)

The seatbacks of the rear seats
can be folded down.

Folding down the rear
seatbacks

COROLLA HYBRID_OM_General_OM12M44E

Summary of Contents for Corolla Hybrid 2019












































































































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands

Toyota Corolla Hybrid 2019, Owner'S Manual

Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands