Toyota Corolla Hybrid 2019 Owner'S Manual Download

Page: 146 / 491

144

COROLLA HV_ 国瑞 _GE

3-3. Adjusting the seats

■

Front seats

Pull the head restraints up.

Down

Push the head restraint down while
pressing the lock release button .

■

Rear outside seats (adjustable
type)

Pull the head restraints up.

Down

Push the head restraint down while
pressing the lock release button .

■

Adjusting the height of the head
restraints (front seats)

Make sure that the head restraints are

adjusted so that the center of the head

restraint is closest to the top of your

ears.

■

Front seats

Pull the head restraint up while
pressing the lock release button .

Head restraints

Head restraints are provided
for all seats.

WARNING

■

Head restraint precautions

Observe the following precautions

regarding the head restraints. Failure

to do so may result in death or serious

injury.

●

Use the head restraints designed

for each respective seat.

●

Adjust the head restraints to the

correct position at all times.

●

After adjusting the head restraints,

push down on them and make sure

they are locked in position.

●

Do not drive with the head

restraints removed.

Adjusting a head restraint

Removing the head
restraints

COROLLA HYBRID_OM_General_OM12M44E

Summary of Contents for Corolla Hybrid 2019












































































































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands

Toyota Corolla Hybrid 2019, Owner'S Manual

Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands