Toyota Corolla Hybrid 2019 Owner'S Manual Download Page 160

Page: 160 / 491

158

COROLLA HV_ 国瑞 _GE

4-1. Before driving

4-1.Before driving

■

Starting the hybrid system



P.166, 168

■

Driving

With the brake pedal depressed,

shift the shift lever to D.

(



P.174)

Release the parking brake.

(



P.177, 1 78)

Gradually release the brake

pedal and gently depress the

accelerator pedal to accelerate

the vehicle.

■

Stopping

With the shift lever in D, depress

the brake pedal.

If necessary, set the parking

brake.

If the vehicle is to be stopped for an

extended period of time, shift the shift

lever to P. (



P.174)

■

Parking the vehicle

With the shift lever in D, depress

the brake pedal to stop the vehi-

cle completely.

Set the parking brake (



P.177,

178), and shift the shift lever to

P. (



P.174)

Check the parking brake indicator is

illuminated.

Vehicles without a smart entry &

start system: Turn the power

switch to OFF to stop the hybrid

system.

Vehicles with a smart entry &

start system: Press the power

switch to stop the hybrid system.

Slowly release the brake pedal.

Lock the door, making sure that

you have the electronic key on

your person.

If parking on a hill, block the wheels as

needed.

■

Starting off on a steep uphill

Make sure that the parking

brake is set and shift the shift

lever to D.

Hill-start assist control will operate.

(



P.268)

Gently depress the accelerator

pedal.

Release the parking brake.

■

For fuel-efficient driving

Keep in mind that hybrid vehicles are

similar to conventional vehicles, and it is

necessary to refrain from activities such

as sudden acceleration. (



P.273)

■

Driving in the rain

●

Drive carefully when it is raining,

because visibility will be reduced, the

windows may become fogged-up, and

the road will be slippery.

●

Drive carefully when it starts to rain,

because the road surface will be

especially slippery.

●

Refrain from high speeds when driv-

ing on an expressway in the rain,

because there may be a layer of water

between the tires and the road sur-

face, preventing the steering and

Driving the vehicle

The following procedures
should be observed to ensure
safe driving:

Driving procedure

COROLLA HYBRID_OM_General_OM12M44E

Summary of Contents for Corolla Hybrid 2019












































































































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands

Toyota Corolla Hybrid 2019, Owner'S Manual

Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands