Toyota Corolla Hybrid 2019, Owner'S Manual

Page: 168 / 491

166
COROLLA HV_ 国瑞 _GE
4-2. Driving procedures
4-2.Driving procedures
1 Check that the parking brake is
set. (  P.177, 178)
2 Check that the shift lever is in P.
3 Firmly depress the brake pedal.
4 Turn the power switch to START
to start the hybrid system.
If the “READY” indicator turns on, the
hybrid system will operate normally.
Continue depressing the brake pedal
until the “READY” indicator is illumi-
nated.
5 Check that the “READY” indica-
tor is illuminated.
If the “READY” indicator changes form
a flashing light to a solid light and a
beep sound, the hybrid system is start-
ing normally.
The vehicle will not move when the
“READY” indicator is off.
The vehicle can move when the
“READY” indicator is on even if the
engine is stopped. (The engine starts or
stops automatically in accordance with
the state of the vehicle.)
■
If the hybrid system does not start
The immobilizer system may not have
been deactivated. (  P.79) Contact your
Toyota dealer.
■
When the ambient temperature is
low, such as during winter driving
conditions
When starting the hybrid system, the
flashing time of the “READY” indicator
may be long. Leave the vehicle as it is
until the “READY” indicator is steady on,
as steady means the vehicle is able to
move.
■
Sounds and vibrations specific to a
hybrid vehicle

P.74
■
When the steering lock cannot be
released
When starting the hybrid system, the
power switch may seem stuck in OFF.
To free it, turn the key while turning the
steering wheel slightly left and right.
■
If the “READY” indicator does not
come on
In the event that the “READY” indicator
does not come on even after performing
the proper procedures for starting the
vehicle, contact your Toyota dealer
immediately.
■
If the hybrid system is malfunction-
ing

P.78
Power (ignition) switch
(vehicles without a
smart entry & start sys-
tem)
Starting the hybrid system
COROLLA HYBRID_OM_General_OM12M44E