Toyota Corolla Hybrid 2019 Owner'S Manual Download Page 131

Page: 131 / 491

129

COROLLA HV_ 国瑞 _GE

3-2. Opening, closing and locking the doors

Befor

e dr

ing

■

If the smart entry & start system (if
equipped) or the wireless remote
control does not operate properly



Vehicles without a smart entry & start

system

Replace the key battery with a new one

if it is depleted. (



P.388)



Vehicles with a smart entry & start

system

Use the mechanical key to lock and

unlock the doors. (



P.441)

Replace the key battery with a new one

if it is depleted. (



P.388)

■

If the 12-volt battery is discharged
(vehicles with a smart entry & start
system)

The doors cannot be locked and

unlocked using the entry function or

wireless remote control. Lock or unlock

the doors using the mechanical key.

(



P.441)

■

Customization

Some functions can be customized.

(



P.462)

■

Door lock switches (to
lock/unlock)

Locks all the doors

Unlocks all the doors

WARNING

■

To prevent an accident

Observe the following precautions

while driving the vehicle.

Failure to do so may result in a door

opening and an occupant being

thrown out of the vehicle, resulting in

death or serious injury.

●

Ensure that all doors are properly

closed and locked.

●

Do not pull the inside door handle

while driving.

Be especially careful of the driver’s

door, as the door may be opened

even if the inside lock button is in

the locked position.

●

Set the rear door child-protector

locks when children are seated in

the rear seats.

■

When opening or closing a door

Check the surroundings of the vehicle

such as whether the vehicle is on an

incline, whether there is enough

space for a door to open and whether

a strong wind is blowing. When open-

ing or closing the door, hold the door

handle tightly to prepare for any

unpredictable movement.

■

When using the wireless remote
control or the key and operating
the power windows or moon roof
(if equipped)

Operate the power windows or moon

roof after checking to make sure that

there is no possibility of any passen-

ger having any of their body parts

caught in the windows or moon roof.

Also, do not allow children to operate

the wireless remote control or the key.

It is possible for children and other

passengers to get caught in the

power windows or moon roof.

Unlocking and locking the
doors from the inside

COROLLA HYBRID_OM_General_OM12M44E

Summary of Contents for Corolla Hybrid 2019












































































































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands

Toyota Corolla Hybrid 2019, Owner'S Manual

Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands