Toyota Corolla Hybrid 2019 Owner'S Manual Download

Page: 72 / 491

COROLLA HV_ 国瑞 _GE

1-2. Child safety

■

When using an “i-Size MIDI” (for

ASEAN countries

)

Adjust the support leg and ISOFIX con-

nectors as follows:

Lock the ISOFIX connectors where

number 3 can be seen.

Lock the support leg where 6 holes

can be seen.

: Brunei, Indonesia, Malaysia, Singa-

pore, the Philippines and Thailand

■

Top tether anchorages

Top tether anchorages are provided

for the outboard rear seats.

Use top tether anchorages when

fixing the top strap.



Seats with an adjustable type

head restraint

Top tether anchorages
Top strap



Seats with an integrated type

head restraint

Top tether anchorages
Top strap

■

Fixing the top strap to the top
tether anchorages

Install the child restraint system in

accordance to the operation man-

ual enclosed with the child restraint

system.

Adjust the head restraint to the

upmost position.

If the head restraint interferes with the

WARNING

■

When installing a child restraint
system

Observe the following precautions.

Failure to do so may result in death or

serious injury.

●

After securing a child restraint sys-

tem, never adjust the seat.

●

When using the lower anchorages,

be sure that there are no foreign

objects around the anchorages and

that the seat belt is not caught

behind the child restraint system.

●

Follow all installation instructions

provided by the child restraint sys-

tem manufacturer.

Using a top tether anchor-
age

COROLLA HYBRID_OM_General_OM12M44E

Summary of Contents for Corolla Hybrid 2019












































































































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands

Toyota Corolla Hybrid 2019, Owner'S Manual

Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands