Toyota Corolla Hybrid 2019 Owner'S Manual Download Page 292

Page: 292 / 491

290

COROLLA HV_ 国瑞 _GE

5-4. Playing an audio CD and MP3/WMA discs

CDs with copy-protect features may not

play correctly.

■

CD player protection feature

To protect the internal components,

playback is automatically stopped when

a problem is detected while the CD

player is being used.

■

If a CD is left inside the CD player
or in the ejected position for
extended periods

The CD may be damaged and may not

play properly.

■

Lens cleaners

Do not use lens cleaners. Doing so may

damage the CD player.

■

MP3, WMA and AAC files

MP3 (MPEG Audio LAYER3) is a stand-

ard audio compression format.
Files can be compressed to approxi-

mately 1/10 of their original size by

using MP3 compression.
WMA (Windows Media Audio) is a

Microsoft audio compression format.
This format compresses audio data to a

size smaller than that of the MP3 format.
AAC is short for Advanced Audio Cod-

ing and refers to an audio compression

technology standard used with MPEG2

and MPEG4.
There is a limit to the MP3, WMA and

AAC file standards and to the media/for-

mats recorded by them that can be

used.

●

MP3 file compatibility

• Compatible standards
MP3 (MPEG1 LAYER3, MPEG2 LSF

LAYER3)

• Compatible sampling frequencies
MPEG1 LAYER3: 32, 44.1, 48 (kHz)
MPEG2 LSF LAYER3: 16, 22.05, 24

(kHz)

• Compatible bit rates (compatible with

VBR)

MPEG1 LAYER3: 32-320 (kbps)
MPEG2 LSF LAYER3: 8-160 (kbps)

• Compatible channel modes: stereo,

joint stereo, dual channel and monau-

ral

●

WMA file compatibility

• Compatible standards
WMA Ver. 7, 8, 9 (9.1/9.2)

• Compatible sampling frequencies
32, 44.1, 48 (kHz)

• Compatible bit rates (only compatible

with 2-channel playback)

Ver. 7, 8: CBR 48-192 (kbps)
Ver. 9 (9.1/9.2): CBR 48-320 (kbps)

●

AAC file compatibility

• Compatible standards
MPEG4/AAC-LC

• Compatible sampling frequencies
11.025/12/16/22.05/24/32/44.1/48 (kHz)

• Compatible bit rates (compatible with

VBR)

8-320 (kbps)

• Compatible channel modes
1ch, 2ch (Dual channel is not supported)

●

Compatible media

Media that can be used for MP3, WMA

and AAC playback are CD-Rs and

CD-RWs.
Playback in some instances may not be

possible, depending on the status of the

CD-R or CD-RW. Playback may not be

possible or the audio may jump if the

disc is scratched or marked with finger-

prints.

●

Compatible disc formats

COROLLA HYBRID_OM_General_OM12M44E

Summary of Contents for Corolla Hybrid 2019












































































































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands

Toyota Corolla Hybrid 2019, Owner'S Manual

Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands