Toyota Corolla Hybrid 2019 Owner'S Manual Download Page 436

Page: 436 / 491

434

COROLLA HV_ 国瑞 _GE

8-2. Steps to take in an emergency

ornament.

Slightly loosen the wheel nuts

(one turn).

Turn the tire jack portion by

hand until the center of the

recessed portion of the jack is in

contact with the center of the

jack point.

Assemble the jack handle

extension.

Raise the vehicle until the tire is

slightly raised off the ground.

Remove all the wheel nuts and

the tire.

When resting the tire on the ground,

place the tire so that the wheel design

faces up to avoid scratching the wheel

surface.

COROLLA HYBRID_OM_General_OM12M44E

Summary of Contents for Corolla Hybrid 2019












































































































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands

Toyota Corolla Hybrid 2019, Owner'S Manual

Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands