Toyota Corolla Hybrid 2019 Owner'S Manual Download

Page: 197 / 491

195

COROLLA HV_ 国瑞 _GE

4-3. Operating the lights and wipers

riv

ing

WARNING

■

Caution regarding the use of
windshield wipers in AUTO mode
(vehicles with rain-sensing wind-
shield wipers)

The windshield wipers may operate

unexpectedly if the sensor is touched

or the windshield is subject to vibra-

tion in AUTO mode. Take care that

your fingers or anything else do not

become caught in the windshield wip-

ers.

■

Caution regarding the use of
washer fluid

When it is cold, do not use the washer

fluid until the windshield becomes

warm. The fluid may freeze on the

windshield and cause low visibility.

This may lead to an accident, result-

ing in death or serious injury.

NOTICE

■

When there is no washer fluid
spray from the nozzle

Damage to the washer fluid pump

may be caused if the lever is pulled

toward you and held continually.

■

When a nozzle becomes blocked

In this case, contact your Toyota

dealer.

Do not try to clear it with a pin or other

object. The nozzle will be damaged.

COROLLA HYBRID_OM_General_OM12M44E

Summary of Contents for Corolla Hybrid 2019












































































































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands

Toyota Corolla Hybrid 2019, Owner'S Manual

Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands