Toyota Corolla Hybrid 2019 Owner'S Manual Download

Page: 248 / 491

246

COROLLA HV_ 国瑞 _GE

4-5. Using the driving support systems

Immediately after the switch is pressed,

the dynamic radar cruise control indica-

tor will come on. Afterwards, it switches

to the cruise control indicator.
Switching to constant speed control

mode is only possible when operating

the switch with the cruise control off.

Accelerate or decelerate, with

accelerator pedal operation, to

the desired vehicle speed (at or

above approximately 30 km/h

[20 mph]) and press the “-SET”

switch to set the speed.

Cruise control “SET” indicator will come

on.
The vehicle speed at the moment the

switch is released becomes the set

speed.
Adjusting the speed setting:



P.243

Canceling and resuming the speed set-

ting:



P.245

■

Dynamic radar cruise control can
be set when

●

The shift lever is in D.

●

Depending on the control mode, this

item can be set at the following

speeds.

• Vehicle-to-vehicle distance control

mode: Approximately 30 km/h (20

mph) or more

• Constant speed control mode:

Approximately 30 km/h (20 mph) or

■

Accelerating after setting the vehi-
cle speed

The vehicle can accelerate by operating

the accelerator pedal. After accelerat-

ing, the set speed resumes. However,

during vehicle-to-vehicle distance con-

trol mode, the vehicle speed may

decrease below the set speed in order

to maintain the distance to the preceding

vehicle.

■

Automatic cancelation of vehi-
cle-to-vehicle distance control
mode

Vehicle-to-vehicle distance control mode

is automatically canceled in the follow-

ing situations.

●

Actual vehicle speed falls below

approximately 25 km/h (16 mph).

●

VSC is activated.

●

TRC is activated for a period of time.

●

When the VSC or TRC system is

turned off.

●

The sensor cannot detect correctly

because it is covered in some way.

●

Pre-collision braking is activated.

If vehicle-to-vehicle distance control

mode is automatically canceled for any

reasons other than the above, there

may be a malfunction in the system.

Contact your Toyota dealer.

■

Automatic cancelation of constant
speed control mode

Constant speed control mode is auto-

matically canceled in the following situa-

tions:

●

Actual vehicle speed is more than

approximately 16 km/h (10 mph)

below the set vehicle speed.

COROLLA HYBRID_OM_General_OM12M44E

Summary of Contents for Corolla Hybrid 2019












































































































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands

Toyota Corolla Hybrid 2019, Owner'S Manual

Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands