Toyota Corolla Hybrid 2019 Owner'S Manual Download

Page: 46 / 491

COROLLA HV_ 国瑞 _GE

1-1. For safe use

WARNING

●

Do not allow anyone to kneel on the

passenger seat toward the door or

put their head or hands outside the

vehicle.

●

Vehicles without an SRS driver’s

knee airbag: Do not attach anything

to or lean anything against areas

such as the dashboard or steering

wheel pad. These items can

become projectiles when the SRS

driver and front passenger airbags

deploy.

●

Vehicles with an SRS driver’s knee

airbag: Do not attach anything to or

lean anything against areas such

as the dashboard, steering wheel

pad and lower portion of the instru-

ment panel. These items can

become projectiles when the SRS

driver, front passenger and driver’s

knee airbag deploy.

●

Vehicles without SRS curtain shield

airbags: Do not attach anything to

areas such as a door, windshield

and side windows.

●

Vehicles with SRS curtain shield

airbags: Do not attach anything to

areas such as a door, windshield,

side windows, front or rear pillar,

roof side rail and assist grip.

(Except for the speed limit label



P.421)

●

Vehicles without a smart entry &

start system and with an SRS

driver’s knee airbag: Do not attach

any heavy, sharp or hard objects

such as keys and accessories to

the key. The objects may restrict

the SRS knee airbag inflation or be

thrust into the driver’s seat area by

the force of the deploying airbag,

thus causing a danger.

●

Vehicles with SRS curtain shield

airbags: Do not hang coat hangers

or other hard objects on the coat

hooks. All of these items could

become projectiles and may cause

death or serious injury, should the

SRS curtain shield airbags deploy.

●

Vehicles with an SRS driver’s knee

airbag: If a vinyl cover is put on the

area where the SRS driver’s knee

airbag will deploy, be sure to

remove it.

COROLLA HYBRID_OM_General_OM12M44E

Summary of Contents for Corolla Hybrid 2019












































































































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands

Toyota Corolla Hybrid 2019, Owner'S Manual

Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands