Toyota Corolla Hybrid 2019 Owner'S Manual Download

Page: 432 / 491

430

COROLLA HV_ 国瑞 _GE

8-2. Steps to take in an emergency



Stop the vehicle in a safe place

on a hard, flat surface.



Set the parking brake.



Shift the shift lever to P.



Stop the hybrid system.



Turn on the emergency flashers.



Vehicles with a compact spare tire

Jack handle
Spanners

If you have a flat tire

(vehicles with a spare

tire)

Your vehicle is equipped with a
spare tire. The flat tire can be
replaced with the spare tire.

For details about tires:



P.372

WARNING

■

If you have a flat tire

Do not continue driving with a flat tire.

Driving even a short distance with a

flat tire can damage the tire and the

wheel beyond repair, which could

result in an accident.

Before jacking up the vehi-
cle

Location of the spare tire, jack and tools

COROLLA HYBRID_OM_General_OM12M44E

Summary of Contents for Corolla Hybrid 2019












































































































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands

Toyota Corolla Hybrid 2019, Owner'S Manual

Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands