Toyota Corolla Hybrid 2019 Owner'S Manual Download Page 227

Page: 227 / 491

225

COROLLA HV_ 国瑞 _GE

4-5. Using the driving support systems

riv

ing

Vehicle with BSM: When the system

determines that the vehicle might

depart from its lane and that the possi-

bility of a collision with an overtaking

vehicle in the adjacent lane is high, the

steering assist function will operate

even if the turn signals are operating.

: Boundary between asphalt and the

side of the road, such as grass, soil,

or a curb

■

Vehicle sway warning function

When the vehicle is swaying within

a lane, the warning buzzer will

sound and a message will be dis-

played on the multi-information dis-

play to alert the driver.

Press the LDA switch to turn the

LDA system on.

The LDA indicator illuminates and a

message is displayed on the multi-infor-

mation display.
Press the LDA switch again to turn the

LDA system off.
When the LDA system is turned on or

off, operation of the LDA system contin-

ues in the same condition the next time

the hybrid system is started.

Turning LDA system on

COROLLA HYBRID_OM_General_OM12M44E

Summary of Contents for Corolla Hybrid 2019












































































































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands

Toyota Corolla Hybrid 2019, Owner'S Manual

Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands