Toyota Corolla Hybrid 2019 Owner'S Manual Download

Page: 79 / 491

COROLLA HV_ 国瑞 _GE

1-3. Hybrid system

For s

afety
and s

urity

There is an air intake vent under

the right side of the rear seat for the

purpose of cooling the hybrid bat-

tery (traction battery). If the vent

becomes blocked, the hybrid bat-

tery may overheat, charging/dis-

charging of the hybrid battery

(traction battery) may become lim-

ited.

WARNING

●

If your vehicle needs to be towed,

do so with the front wheels raised. If

the wheels connected to the electric

motor (traction motor) are on the

ground when towing, the motor may

continue to generate electricity.

This may cause a fire. (



P.403)

●

Carefully inspect the ground under

the vehicle. If you find that liquid

has leaked onto the ground, the fuel

system may have been damaged.

Leave the vehicle as soon as possi-

ble.

■

Hybrid battery (traction battery)

●

Never resell, hand over or modify

the hybrid battery. To prevent acci-

dents, hybrid batteries that have

been removed from a disposed

vehicle are collected through

Toyota dealer. Do not dispose of the

battery yourself.

Unless the battery is properly col-

lected, the following may occur,

resulting in death or serious injury:
• The hybrid battery may be illegally

disposed of or dumped, and it is

hazardous to the environment or

someone may touch a high voltage

part, resulting in an electric shock.

• The hybrid battery is intended to be

used exclusively with your hybrid

vehicle. If the hybrid battery is used

outside of your vehicle or modified

in any way, accidents such as elec-

tric shock, heat generation, smoke

generation, an explosion and elec-

trolyte leakage may occur.

When reselling or handing over your

vehicle, the possibility of an accident

is extremely high because the person

receiving the vehicle may not be

aware of these dangers.

●

If your vehicle is disposed of with-

out the hybrid battery having been

removed, there is a danger of seri-

ous electric shock if high voltage

parts, cables and their connectors

are touched. In the event that your

vehicle must be disposed of, the

hybrid battery must be disposed of

by your Toyota dealer or a qualified

service shop. If the hybrid battery is

not disposed of properly, it may

cause electric shock that can result

in death or serious injury.

NOTICE

■

Hybrid battery (traction battery)
air intake vent

Do not carry large amounts of water

such as water cooler bottles in the

vehicle. If water spills onto the hybrid

battery (traction battery), the battery

may be damaged. Have the vehicle

inspected by your Toyota dealer.

Hybrid battery (traction bat-
tery) air intake vent

COROLLA HYBRID_OM_General_OM12M44E

Summary of Contents for Corolla Hybrid 2019












































































































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands

Toyota Corolla Hybrid 2019, Owner'S Manual

Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands