Toyota Corolla Hybrid 2019 Owner'S Manual Download Page 47

Page: 47 / 491

COROLLA HV_ 国瑞 _GE

1-1. For safe use

For s

afety
and s

urity

WARNING

●

Do not use seat accessories which

cover the parts where the SRS side

airbags inflate as they may interfere

with inflation of the SRS airbags.

Such accessories may prevent the

side airbags from activating cor-

rectly, disable the system or cause

the side airbags to inflate acciden-

tally, resulting in death or serious

injury.

●

Do not strike or apply significant

levels of force to the area of the

SRS airbag components or the

front doors.

Doing so can cause the SRS

airbags to malfunction.

●

Do not touch any of the component

parts immediately after the SRS

airbags have deployed (inflated) as

they may be hot.

●

If breathing becomes difficult after

the SRS airbags have deployed,

open a door or window to allow

fresh air in, or leave the vehicle if it

is safe to do so. Wash off any resi-

due as soon as possible to prevent

skin irritation.

●

Vehicles without SRS curtain shield

airbags: If the areas where the SRS

airbags are stored, such as the

steering wheel pad, are damaged

or cracked, have them replaced by

your Toyota dealer.

●

Vehicles with SRS curtain shield

airbags: If the areas where the SRS

airbags are stored, such as the

steering wheel pad and front and

rear pillar garnishes, are damaged

or cracked, have them replaced by

your Toyota dealer.

■

Modification and disposal of SRS
airbag system components

Do not dispose of your vehicle or per-

form any of the following modifica-

tions without consulting your Toyota

dealer. The SRS airbags may mal-

function or deploy (inflate) acciden-

tally, causing death or serious injury.

●

Installation, removal, disassembly

and repair of the SRS airbags

●

Repairs, modifications, removal or

replacement of the steering wheel,

instrument panel, dashboard, seats

or seat upholstery, front, side and

rear pillars, roof side rails, front

door panels, front door trims or front

door speakers

●

Modifications to the front door panel

(such as making a hole in it)

●

Repairs or modifications of the front

fender, front bumper, or side of the

occupant compartment

●

Installation of a grille guard (bull

bars, kangaroo bar, etc.), snow

plows or winches

●

Modifications to the vehicle’s sus-

pension system

●

Installation of electronic devices

such as mobile two-way radios

(RF-transmitter) and CD players

COROLLA HYBRID_OM_General_OM12M44E

Summary of Contents for Corolla Hybrid 2019












































































































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands

Toyota Corolla Hybrid 2019, Owner'S Manual

Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands