Toyota Corolla Hybrid 2019 Owner'S Manual Download

Page: 337 / 491

335

COROLLA HV_ 国瑞 _GE

6-3. Using the storage features

Interior features

Pull up the lever to open the glove

box.

■

Glove box light (if equipped)

The glove box light turns on when the

tail lights are on.



Front



Rear (if equipped)

Pull the armrest down.



Front



Rear

Glove box

WARNING

■

Caution while driving

Keep the glove box closed. In the

event of sudden braking or sudden

swerving, an accident may occur due

to an occupant being struck by the

open glove box or the items stored

inside.

Cup holders

WARNING

■

Items unsuitable for the cup
holder

Do not place anything other than cups

or beverage cans in the cup holders.

Other items may be thrown out of the

holders in the event of an accident or

sudden braking and cause injury. If

possible, cover hot drinks to prevent

burns.

Bottle holders/door pockets

COROLLA HYBRID_OM_General_OM12M44E

Summary of Contents for Corolla Hybrid 2019












































































































































































































































































































































































































































































































Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands

Toyota Corolla Hybrid 2019, Owner'S Manual

Search results

Summary of Contents for Corolla Hybrid 2019

Reviews:

Related manuals for Corolla Hybrid 2019

Brands by name

Popular brands