Toshiba Strata CTX, Programming Manual

Page: 370 / 533

Telephone Button Programming
800 Series Programs
13-92
Strata CTX Programming - Part 3:Telephone Button Programming 04/03
800 Series Programs
Programs 801~803
Button Sequence Value(s) Summary
801 Network Jack LAN
Device Assignments
,
+ROG
This screen assigns the LAN parameters for the PC applications
connected to the BECU Network Jack through a LAN or Hub.
801-00 LAN Port Number
n,
+ROG
n = 1~12 (default = no value) Enter the port number of the LAN device to be assigned. Refer to
Program 803 SMDR SMDI CTI Port Assignments.
Notes
• Program the local port number for LCD Control of Voice Mail
•
Use the same Device Port No. (11) for Network BLF.
• Use 10 for Network TPI
•
Use 12 for Network DSS
Network BLF and DSS are available only with CTX Release 1.3 or
higher software and with CTX WinAdmin Release 1.3 or higher
software.
801-01 Protocol
)%
, n,
+ROG
n = 1. TCP (default)
2. UDP
Select communication Protocol.
Note Select UDP for Network DSS.
801-02 PC Operation Type
)%
, n,
+ROG
n = 1. Server (default)
2. Client
Enter the application PC type: Server or Client.
801-03 Data Flow
)%
, n,
+ROG
n = 1. Synchronization
2. Asynchronization
(default)
Enter the data flow protocol that should take place between the CTX
and PC. If the PC is a CTX, CTI application assign “Asynchronization”
to data flow.
801-04 Server Port Number
)%
, n,
+ROG
n = 0~65535 (default = 0) Enter the Server Port Number and proceed to 07 Read Retry
Number. This field is required if Server was selected in 02 PC
Operation Type above. If not, leave this field blank and proceed to 05
Client IP Address.
Note Use 6000 for Network BLF, 3000 for Network DSS, and 5000
for Network TPI.
801-05 Client IP Address
)%)%)%
RU)%
, n,
+ROG
n = 0~255 (default = 0) Enter the Client LAN IP Address. This field is required if Client was
selected in 02 PC Operation Type above.
0~255 for each octet (default = 0)
Enter IP address of Stratagy iES32 or SES.
801-06
801-07
801-08
801-09 Write Retry Number
)%
, n,
+ROG
n = 0~65535 (default = 0) Enter the Client Port number. This field is required if Client was
selected in 02 PC Operation Type above.
801-10 Write Retry Number
)%
, n,
+ROG
n = 0~10 (default = 1) Set the Read Retry counter to (1~10).
801-11 Write Retry Number
)%
, n,
+ROG
,
+ROG
n = 0~10 (default = 1) Set the Write Retry counter to (1~10).
803 IO Logical Device
Assignment
,
+ROG
This screen is used to assign:
1. SMDR and SMDI to logical device and BSIS, RS-232 port
numbers.
2. CTX WinAdmin, ACD sever, and Attendant Console to BECU,
Network Jack logical device and LAN port numbers.
803-00 Logical Device
Number
n,
+ROG
n = 100 = SMDR
300 or 301 = SMDI
200~208 = CTI LAN
Devices of PCs (default =
no value)
400 = BLF
500 = DSS Enter the 3-digit logical device number for SMDR, SMDI, and LAN
device or PC application. See
“Device Table” on page 13-93
SMDR: 100
SMDI: 300 or 301
CTI LAN devices or PCs can be assigned to any of the 9 LAN devices
numbers available: 200~208.