Toshiba Strata CTX, Programming Manual, Page: 332 / 533

Telephone Button Programming
300 Series Programs
13-54
Strata CTX Programming - Part 3:Telephone Button Programming 04/03
Bearer Services Table
Bearer Services Nat’l ISDN ETSI TTC
Circuit
Mode
Speech X X X
3.1 KHz Audio X X X
7 KHz Audio X X
unrestricted digital
information 64 kbps X X X
Rate adaptation from 56
kbps
X
2x64 X X
384kbp (H0) X X X
1536kbps (H11) X X X
1920kbps (H12) X
multirate (n x 64 kbps) X
Restricted digital Information X X
Video X X
Packet
Mode
Shelf/Slot/Circuit
Programs 303~315
Button Sequence Value(s) Summary
303 ISDN Trunk Delete
,
+ROG
This command deletes ISDN Trunks.
303-00 Channel Group
Number
n,
+ROG
,
+ROG
n = 1~32 (CTX100)
1~48 (CTX670 Basic)
1~128 (CTX670 Exp.) Enter the channel group number to delete.
304 Incoming Line Group
Assignment
,
+ROG
This assignment is used to configure ILGs only, OLGs are configured
in the Outgoing Line Group Assignment 306. The same line can be
placed in an ILG and OLG.
304-00 Group Number
n,
+ROG
n = 1~32 (CTX100)
1~50 (CTX670 Basic)
1~128 (CTX670 Exp.) Enter the group number of the line group that should be configured.
304-01 Group Type
)%
, n,
+ROG
n = 1. Analog (default)
2. ISDN
Select the ILG Type.
304-02 Trunk Type
)%
, n,
+ROG
n = 1. CO (default)
2. Tie
Select the Trunk Type.
304-03 Service Type
)%
, n,
+ROG
n = 1. DID
2. DIT (default)
Select CO Trunk Service Type.
304-04 Private Service Type
)%
, n,
+ROG
n = 1. Standard (default)
2. QSIG
Select the Tie Trunk Service Type. This field is required when Trunk
Type is set to Tie.
304-05 GCO Key Number
)%
, n,
+ROG
n = 0~32 (CTX100)
0~50 (CTX670 Basic)
0~128 (CTX670 Exp.)
(default = 0) Select ILG GCO Key Group for DIT mode (see Trunk Type above).
The same GCO cannot belong to different ILGs.