Toshiba Strata CTX, Programming Manual

Page: 346 / 533

Telephone Button Programming
300 Series Programs
13-68
Strata CTX Programming - Part 3:Telephone Button Programming 04/03
B Channel Defaults
B Channel Position
01~15 16 17~23 24 25~31
Span Interface Speed
1.5M (T1) ON ON ON OFF (Dch Pos)
2.0M (E1) ON OFF (Dch Pos) ON ON ON
Programs 321~324
Button Sequence Value(s) Summary
321 Calling Number
Identification
,
+ROG
The Calling Number ID is what is defined as the user supplied Calling
Number. This number may be optionally screened by the PSTN to
ensure only calls from valid billable telephone numbers are allowed to
originate calls.
321-00 OLG Number
n,
+ROG
n = 1~32 (CTX100)
1~50 (CTX670 Basic)
1~128 (CTX670 Exp.) Enter the OLG Number.
321-01 Default Number
)%
, n,
+ROG
n = Up to 10 digits Enter the telephone number to use by default when originating a call.
This is the number that the PSTN has registered for billing purposes.
321-02 Number Prefix
)%
, n,
+ROG
n = Up to 10 digits Enter the prefix telephone number for which a DID number will be
appended to create a User Identified telephone number. This number
may or may not be a billed number, but is used for Caller ID at the
distant end and could be used for returning your call.
321-03 Number Verification
)%
, n,
+ROG
n = 1. Enable
2. Disable
Specify whether the number provided should be screened by the
PSTN before the call is to proceed.
321-04 Default Number 2
)%
, n,
+ROG
,
+ROG
n = Up to 10 digits Enter the second telephone number to use by default when
originating a call. This is the number that the PSTN has registered for
billing purposes. The second number is for BRI only
322 CNIS Presentation
And Special Number
Assignment
,
+ROG
When calls are sent to the PSTN with Calling Number Identification
Service (CNIS), the CTX can supply special CNIS information as part
of the Setup Message. This program may be used for sending a
unique number based on the source directing the call to the Strata
CTX PRI.
322-00 OLG Number
n,
+ROG
n = 1~32 (CTX100)
1~50 (CTX670 Basic)
1~128 (CTX670 Exp.) OLG Number.
322-01 Source Type
)%
, n,
+ROG
n = 1. Primary DN (0~99999)
2. Group CO (1~128)
3. Pooled Line Group
(1~128)
Specify the type of circuit used for outgoing calls: 1- PDN; 2- GCO; 3-
Pooled Line.
322-02 Source Number
)%
, n,
+ROG
n = Up to 5 digits
GCO and POOL:
1~32 (CTX100)
1~50 (CTX670 Basic)
1~128 (CTX670 Exp.) Specify the number of the source type selected (PDN, GCO or Pooled
Line).
Note Entries for this field depend on the Destination Type chosen.
There are no default values for this field (default = no value).
•
PDN: 0~99999
• GCO: 1~128
•
POOL: 1~128
322-03 Special Number
Assignments
)%
, n,
+ROG
,
+ROG
n = Up to 7 digits Specify the number to be sent when calling out from the source (max.
seven digits). This number is appended to Program 321 FB02.
Note Destination Type and Destination must be entered before a
DID number can be assigned.