Toshiba Strata CTX, Programming Manual

Page: 63 / 533

System
102 Flexible Access Codes
Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03
4-3
Sy
stem
102 Flexible Access Codes
Prerequisite Program:
None
Strata CTX comes with pre-assigned Flexible Access Codes that the telephone dials to access features.
This enables you to create customized Flexible Access Codes. The Strata CTX Flexible Numbering Plan
associates features stored in memory (i.e., “Store Code,” see
Table 4-1 ) to a Flexible Numbering Code
assigned by the user.
Note
Flexible Numbering Plan access codes cannot conflict with DN assignments.
1. Enter your customized Flexible Numbering Plan in the “Programmed Value” column of Table 4-1 .
2. From the Program Menu click
System > Flexible Numbering
Plan. The Numbering Plan
Assignment screen displays
(shown at right).
3. 00 Flexible Numbering Plan –
Enter the digits to be dialed
(0~9,#,*) to access a feature or an
OLG. To delete, select “No Data”
in “01 Feature Name.” Conflict
with an assigned DN will produce
an error.
4. 01 Flexible Numbering Feature –
Select the Flexible Numbering
Feature (see
Table 4-1 ) to see
which access code is being
assigned.
Note To assign an access code to an OLG, select “Line Group access code - one access code for each
OLG.” To assign the prefix digit(s) for the access code of individual lines, select “Line access code -
leading digit(s) to access individual lines”. Example: If #7 is selected as the line access prefix, the
users will dial #7xxx to access an individual line (where xxx is the line number).
5. 02 OLG Number – Enter the Outgoing Line Group number to which the OLG access code is being
assigned. This field is only required if you chose “Line Group Access Code – one access code for each
OLG” for the Flexible Numbering Feature in
Step 4 above. Enter a 0 in this field if a Feature Code other
than 551 was selected.
Note 02 OLG Number (0~32 CTX100; 0~50 CTX670 Basic; 0~128 CTX670 Expanded) field appears
only when 01 Feature Name Line Group Access Code – one access code for each OLG is selected.
6. Click Submit.