Toshiba Strata CTX, Programming Manual, Page: 334 / 533

Telephone Button Programming
300 Series Programs
13-56
Strata CTX Programming - Part 3:Telephone Button Programming 04/03
304-24 Change COS
Override Code
)%
, n,
+ROG
n = 1. Enable
2. Disable (default)
Enable authority to change COS Override Code.
304-25 Register Speed Dial
Codes
)%
, n,
+ROG
n = 1. Enable
2. Disable (default)
Enable authority to create system speed dial codes.
304-26 Originator Invoke
OCA
)%
, n,
+ROG
n = 1. Enable
2. Disable (default)
Enable authority for the originator of a call to invoke OCA when
encountering a busy station.
304-27 Senderized Tone
Mode
)%
, n,
+ROG
n = 1. Dial Tone (default)
2. Entry Tone
3. Silence
Send DTMF tones as a complete number rather than digit-by digit.
304-28 Emergency Call
Group
)%
, n,
+ROG
,
+ROG
n = 1~8
(default = 1) Used to enable E911 calling across a QSIG network. The QSIG ILG
is assigned to an Emergency Call Group in the same way a station is
in Program 200 FB17. Without this assignment, the call will not
attempt to complete to one of the trunks in the Emergency Group and
will result in an abandoned call. See Program 550
“Enhanced 911
Emergency Call Group” on page 13-85 .
305 ILG Delete
,
+ROG
This command deletes Incoming Line Groups.
305-00 ILG Number
n,
+ROG
,
+ROG
n = 1~32 (CTX100)
1~50 (CTX670 Basic)
1~128 (CTX670 Exp.) Enter the ILG number to delete.
306 Outgoing Line Group
Assignment
,
+ROG
OLG is a line selection feature which enables the use of external trunk
or private line groups for outgoing service. Assign and configure up to
128 OLGs (the same line can be placed in an OLG and an ILG).
306-00 Group Number
n,
+ROG
n = 1~32 (CTX100)
1~50 (CTX670 Basic)
1~128 (CTX670 Exp.) Enter the OLG Group number.
306-01 Group Type
)%
, n,
+ROG
n = 1. Analog (default)
2. ISDN
Select the OLG Type.
306-02 Trunk Type
)%
, n,
+ROG
n = 1. CO (default)
2. Tie
Select the Trunk Type.
306-03 Service Type
)%
, n,
+ROG
n = 1. Standard (default)
2. QSIG
TIE Trunk Service Type.
306-04 GCO Key1 Number
)%
, n,
+ROG
n = 0~32 (CTX100)
0~50 (CTX670 Basic)
0~128 (CTX670 Exp.)
(default = 0) Select the first GCO Key Group number.
306-06 Pooled Key1 Number
)%
, n,
+ROG
n = 0~32 (CTX100)
0~50 (CTX670 Basic)
0~128 (CTX670 Exp.)
(default = 0) Select first Pooled Line Key Group number.
306-07 Pooled Key2 Number
)%
, n,
+ROG
n = 0~32 (CTX100)
0~50 (CTX670 Basic)
0~128 (CTX670 Exp.)
(default = 0) Select second Pooled Line Key Group number.
306-08 COS
)%
, n,
6SNU
, n,
6SNU
, n,
+ROG
n = 1~32
(default = 1) Select Day 1, Day 2 and Night Values.
Programs 303~315
(continued)
Button Sequence Value(s) Summary