manualshive.com logo in svg

Toshiba Strata CTX, Programming Manual, Page: 518 / 533

Share
Download
Toshiba Strata CTX Programming Manual Download Page 518

Software and Firmware Updates

IP Telephone/BIPU Firmware Update Procedures

E-2

Strata CTX Programming - Part 4: Appendices   04/03

Figure E-1

FTP Server (SmartMedia card) Network Connection

BIPU Update

Important!

Complete all 

“Prerequisites” 

on 

page E-1

 before you do the following.

➤

From the WinAdmin PC or External SmartMedia read\write device

1. “Force format” a SmartMedia card using WinAdmin.

2. Store the update files on the SM card.

3. Copy the BIPUXXX update file under the SM card PROGRAM folder (XXX is the BIPU firmware 

version level).

Note

The firmware update files can be obtained from TSD FYI, click Technical Services > Software 
(Strata Systems) > CTX IP Firmware.

➤

To perform the BIPU update from the WinAdmin PC 

1. Select Maintenance > Components > Cabinet.

2. Select Operations > SmartMedia to Make sure the BIPUXXX file is stored on the SM card under the 

PROGRAM directory.

3. Force Disable the BIPU cabinet slot. This will cause all IP telephones that are connected to the disabled 

BIPU to be in the “MAKE BUSY” mode.

4. Select IP Telephone > BIPU Program Update, then select the BIPU card slot and BIPU-M card type.

Note

Only BIPU-M1A can be updated. Only BIPU-M1A card slots will be shown with WinAdmin 2.1F 
or higher. The BIPU type selection is not required.

5. Select CTX Internal (SmartMedia) radio button.

An ftp Name and Password is inserted automatically. The IP address of the CTX processor 
(SmartMedia card) is also inserted automatically.

6. From Data Directory box enter “PROGRAM”.

7. From File Name box enter “BIPUXXX”. 

8. Click Start and observe the update status: Getting Updated file\Updating\Finished 

Updating\Resetting\idle.

Notes

•

It could take 1 to 5 minutes to update the BIPU

•

If an error occurs, recheck file names, locations etc. and try again.

WinAdmin Menu
IP Telephone:

BIPU Program update

IPT Program update

WinAdmin PC

CTX Smart Media Card

Program (directory):

BIPUXXX (file)

DIPXXXX (file)

CTX Processor

BIPU

IPT

1

IPT

16

IP Network-WAN, LAN, VPN, Internet server, VPN Router or Switch Box etc. (not a HUB)

6784

Summary of Contents for Strata CTX






















































































































































































































































































































































































































































































































































Reviews:

No comments