Toshiba Strata CTX Programming Manual Download Page 54

Page: 54 / 533

Installation

Step 3: Set up Modem Connection

3-12

Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03

Step 3C: Verify Modem Hardware Settings

Using the steps below verify that the modem hardware settings are set correctly to communicate with the
CTX built-in modem.

1. Go to Start > Settings (Windows 2000 only) >

Control Panel.

2. Click “Phone and Modem Options.”

3. Click the Modem tab.

4. Select the modem used by CTX WinAdmin.

5. Click the Properties button.

6. Click the Advanced tab to verify hardware settings on

the screen (shown right).

7. Click OK and exit.

Summary of Contents for Strata CTX






















































































































































































































































































































































































































































































































































Search results

Summary of Contents for Strata CTX

Reviews:

Toshiba Strata CTX, Programming Manual, Page: 54 / 533

Search results

Summary of Contents for Strata CTX

Reviews: