Toshiba Strata CTX Programming Manual Download Page 56

Page: 56 / 533

Installation

Step 4: Establish Communication with Strata CTX

3-14

Strata CTX Programming - Part 2: CTX WinAdmin Programming 04/03

Step 4: Establish Communication with Strata CTX

Make sure you have completed the Strata CTX to CTX WinAdmin setup procedures described in the first
part of this chapter before proceeding.

1. Open Internet Explorer and point the browser to http://localhost/Ctmc_Local/Default.htm as shown in

the figure below or click on the CTX WinAdmin desktop icon. If the Internet Connection Wizard
displays, refer to

Step 2

under

Step 1: Install CTX WinAdmin Software on page 3-2

2. Click Go. The Login screen

displays (shown right).

3. To log into CTX WinAdmin for

the first time, enter administrator
in User Name field and password
in the Password field.

4. Click on the Login button. The CTX

WinAdmin Title screen displays.

5. Click CTX (shown right) to go to the

connection setup screen.

Summary of Contents for Strata CTX






















































































































































































































































































































































































































































































































































Search results

Summary of Contents for Strata CTX

Reviews:

Toshiba Strata CTX, Programming Manual, Page: 56 / 533

Search results

Summary of Contents for Strata CTX

Reviews: