RemotEye III User Manual – 62330-005
81
RADIUS Configuration
This page allows the administrator to input the RADIUS server parameters. RADIUS is networking protocol that
provides a centralized authentication to use its network service. The RemotEye III has the ability to communicate
with a RADIUS server which will determine if the user has access to RemotEye III services. Here are the parameters
required to enable the Radius feature:
RADIUS UDP Port
This field shows the default UDP port for RADIUS Authentication. (Read-Only)
Primary RADIUS Server
This field allows the administrator to set the IP address of the primary RADIUS server.
Secondary RADIUS Server
This field allows the administrator to set the IP address of the secondary RADIUS server, in case the primary server
does not respond.
Share Secret of Primary Server
This allows the administrator to input the case-sensitive text sting (password) into the text field to access the
RADIUS server.
Share Secret of Secondary Server
This allows the administrator to input the case-sensitive text sting (password) into the text field to access the
RADIUS server.
Packet Timeout Interval (sec)
User can set the Packet Timeout Interval in seconds.
Packet Retry Times
User can set the packet retry times.
Modbus TCP Configuration
Node ID
Node ID can be any number from 1 to 255.
Port Number
Default Modbus TCP port number is 502.
SNMP TRAP Receivers
This page lists the parameters for SNMP trap receivers (for SNMP Network Management).
Index
This field shows the index numbers for the table entries (8 Max).
IP Address
This field allows the administrator to set the IP Address of the NMS station to which the traps should be sent or to
view the current setting.
Community String
This field allows the administrator to set the community string of the trap's PDU (Protocol Data Unit) to be sent or to
view the current setting. The maximum length of the string is 19 characters.
Trap Type
This field allows the administrator to set the types of traps to be received or to view the current settings.
Setting options are:
None: The specified NMS will not receive traps.
Toshiba Trap: Traps are received based on the Toshiba MIB.
Summary of Contents for RemotEye III
Page 1: ... ...
Page 117: ...116 RemotEye III User Manual 62330 005 Figure 62 RemotEye Save Log Utility Set Page ...
Page 166: ......
