108
RemotEye III User Manual – 62330-005
Installation of RemotEye Client using UNIX
Introduction
RSH is a software daemon which is able to get/set specific command from/into RemotEye. The major intention of
this software is to shutdown the local machine before the UPS runs out of power. This program is composed by shell
scripts, written in bash, and virtually portable under any UNIX operating system. The program consists of three
phases: the installation phase, the execution phase, and the configuration phase.
•
The installation phase will help the user setup the program properly by asking a few questions.
•
The execution phase will keep track of the status of a UPS via RemotEye.
•
The configuration phase will guide user to reconfigure the setting that is made in installation phase.
Program Overview
When installing this program, the shutdown shell application will check the target machine’s Operating System (OS)
and determine whether it is a predefined OS from the recognized OS list. If it is not, the user will be prompted to
answer some questions regarding system information (such as cmd name, path, etc). During the configuration phase,
the program will ask user for information regarding the RemotEye (such as its IP address, name, etc). The
reconfiguration phase allows the user to change the settings for later use. After installation, users can execute the
program immediately or during the next system reboot.
Supported Operating System
1.
Red Hat Advance Server release 2.1 AS
2.
Sun Solaris 8 (x86)
3.
Sun Solaris 8 (SPARC)
4.
HP-UX (PA-RISC)
Summary of Contents for RemotEye III
Page 1: ... ...
Page 117: ...116 RemotEye III User Manual 62330 005 Figure 62 RemotEye Save Log Utility Set Page ...
Page 166: ......
