Toshiba RemotEye III, User Manual

Page: 48 / 167

RemotEye III User Manual – 62330-005 47
Output Parameters
This page shows the UPS output voltage source and readings. This page will refresh automatically at a user-defined
rate. To change or view the current refresh setting, select “RemotEye III Management”
→
“HTTP Page Refresh
Rates” in the RemotEye III web interface.
Parameter #
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
Output Rated Apparent Power (VA)
Output Rated Power Factor
TThis field shows the
present UPS output rated
apparent power in VA.
 
This field shows the
present UPS output power
factor.
 
Output Rated Active Power (Watts)
This field shows the
present UPS output rated
active power in Watts.
 
Output Apparent Power (VA)
This field shows the
present UPS apparent
power in VA.
 
Output Frequency Synch Range (Hz)
This field shows the
allowable range for
synchronizing output
frequency.
 
Output Active Power (Watts)
This field shows the
present UPS output active
power in Watts.
 
Output Frequency (Hz)
This field shows the
present UPS output
requnecy in Hz.
 
Output Rated Frequency (Hz)
This field shows the
present UPS output rated
frequency in Hertz.
 
Output Rated Current (Amps)
This field shows the
present UPS output rated
current in Amps.
 
Output Load Percentage (%)
This field shows the UPS
load as a percentage of the
maximum load setting.
 
Object Description 1600XP 4300FA
Output Power Supply Configuration
This field shows the
present power supply
information at the output
for the UPS.
 
Output Over Voltage Level (%)
This field shows the
maximum limit of the
output voltage before it
the UPS enters the over
voltage state.
 
Output Rated Voltage (V)
This field shows the output
rated voltage of the UPS.
This can be changed by the
administrator.
 
Output Under Voltage Level (%)
This field shows the
minimum allowable
voltage before it falls into
under voltage range.
 








Output Number of Lines
This field shows the
present phase of the
output of the UPS.
 
Output Voltage (V)
This field shows the UPS
output voltage in VAC.
 
Output Current (Amps)
This field shows the
present UPS output current
in Amps.
 
Output Parameters









4300