Toshiba RemotEye III, User Manual

Page: 65 / 167

64 RemotEye III User Manual – 62330-005
UPS Control for 1600XP
This page shows the adjustable settings of the 1600XP UPS.
Output Voltage Adjust
This field shows the manual voltage adjustment for the output of the UPS.
Range – -5 to +5 (One increment ~1Vrms)
Default Value = 0
UPS Enable RMTI-3 To Control Mode
This field shows the present mode of the control that the RemotEye III has on the UPS. This allows the RemotEye to
enable or disable control the UPS Bypass and On-Line mode. It is set by the administrator.UPS Mode Change Delay
(secs)
0 – Disable
1 – Enable
Default Value = Enable
UPS Mode Change Delay (secs)
This field shows the amount of time, in seconds, before the UPS will change state.
Range – 0 to 800 seconds
Default Value = 0
UPS Mode Change Request
This field shows the mode the UPS can switch to. Users can notify the UPS to switch to Shutdown, Bypass, On-Line,
using this feature. Choices are:
1- Shutdown Request
2- Bypass Request: UPS Enable RMTI-3 To Control Mode must be Enabled in order to function.
3- On-Line Request: UPS Enable RMTI-3 To Control Mode must be Enabled in order to function
Default Value = None
UPS Start Up Delay Enable
This field shows the present state of the UPS Start Up delay. It can be enabled or disabled. It is set by the
administrator.
0 – Disable
1 – Enable
Default Value = Disable
UPS Start Up Delay (secs)
This field shows the time delay, in seconds, before UPS Start Up immediately following a shutdown. It is set by the
administrator.
Range – 0 to 800 seconds: UPS Start Up Delay Enable must be Enabled in order to function.
Default Value = 0
UPS Start Up Delay Mode
This field shows the mode at which to enter following the start-up delay. It can either enter Bypass state or On-Line
state. It is set by the administrator.
0- Bypass: UPS Start Up Delay Enable must be Enabled in order to function.
1- On-Line
Default Value = Bypass