40
RemotEye III User Manual – 62330-005
Connecting to the RemotEye III via HTTP
A web session can be established once the hardware and software have been prepared. Follow these steps to begin
configuration:
1.
Launch the web browser (e.g. Internet Explorer).
2.
Enter the URL for RemotEye III in the browser’s address field. For example, http://172.18.1.63. The
home page of the RemotEye III will be displayed once a connection is established (See Figure 31:
RemotEye III HTTP Page).
Perform the following procedure to setup the RemotEye III Static IP address, protocols and Date/Time using its
provided web configuration pages.
1.
Select “RemotEye III Management”
→
“RemotEye III Configuration” to configure RemotEye III.
2.
Click the Become Administrator button at the bottom of the screen. The password is case sensitive.
Login:
TOSHIBA
Password:
ADMIN
Non-DHCP users continue on to step 3. DHCP users may skip steps 3 to 6.
3.
Enter the RemotEye III IP address.
4.
Enter the RemotEye III Gateway address in the network.
5.
Enter the RemotEye III Network Mask of the network.
6.
Click Set Value to save the settings.
7.
Select “RemotEye III Management”
→
“Date and Time” to set date and time.
8.
Enter the appropriate date and time in the specified format.
9.
Click Set Value to save the settings.
10.
Select “RemotEye III Management”
→
“RemotEye III Control” to enable or disable the network
protocols.
Note: Disable “RemotEye III DHCP Control” setting if using static IP.
Figure
31
: RemotEye III HTTP Page
Summary of Contents for RemotEye III
Page 1: ... ...
Page 117: ...116 RemotEye III User Manual 62330 005 Figure 62 RemotEye Save Log Utility Set Page ...
Page 166: ......
