90
RemotEye III User Manual – 62330-005
System Setting Change Record (Applicable to 1600XP Only)
This table lists the detail history of system changes that has occurred on the UPS. The Log can store a maximum of
680 records. If more events are recorded, the new record replaces the oldest record.
•
Log Date – This field shows the date of the recording.
•
Log Time - This field shows the time that the values were recorded. Time is displayed in the hh:mm:ss 24-
hour format (i.e., 8:30 p.m. is 20:30:00).
•
Record Number - Maximum number of records is 255.
•
System Input Type
•
System Output Type
•
Input Voltage (%)
•
Output Voltage (%)
•
Output Load (%)
•
DC Input Voltage (%)
•
Battery Voltage (%)
•
Block
•
Item
•
Written
•
Trigger Source
RemotEye III Events Log
This table lists the RemotEye III events since the table was last cleared. If changes have been made by the
administrator, it will display if it was made through “Telnet” or “HTTP” communication following with the IP
address of the user. The existing values are overwritten when the maximum number of entries has been reached.
•
Event Date
•
Event Time
•
Event Description
Clear & Save Log Data
This allows the administrator to save the RemotEye III log data to a file. The saved files are given a .csv extension,
which allows it to be opened using Microsoft© Excel. Specific log data may be cleared by the administrator or the
entire log data record may be cleared after saving the .csv file.
Clear Log Data
This field allows the administrator to the clear log data by checking the applicable box and clicking the Clear button.
Clear Log Data after saving the log file
The log data may be cleared after saving the file as a .CSV file by clicking YES at the Clear Log Data after saving the
log radio button.
Save Log Data
The log data may be saved as a .CSV file by clicking
General Records, RemotEyeIII Events Log, UPS Events
Log, Test Records, Backup Records, Fault Records, Operation Mode Records, Warning Records or System
Setting Change Record.
Note: If the option “Clear Log Data after saving the log file” is selected, once the “Save Log Data” is clicked, the
clear log function will be performed even if the user cancels the “Save Log Data” action. To clear any of the logs,
must be logged in as an administrator.
Summary of Contents for RemotEye III
Page 1: ... ...
Page 117: ...116 RemotEye III User Manual 62330 005 Figure 62 RemotEye Save Log Utility Set Page ...
Page 166: ......
