Toshiba RemotEye III, User Manual

Page: 118 / 167

RemotEye III User Manual – 62330-005 117
Tupgrade Firmware Tool
General information
To perform a firmware upgrade, the RemotEye III must be connected to the same network as the workstation from
which the upgrade file is to be sent. In the RemotEye III make sure the
Network Upgrade Control is enabled, under
RemotEye III Control , and that users have the Admin login and Password string information.
Here is the way to manually upgrade RemotEye Firmware:
1) Web Interface: Go to RemotEye III Management

RemotEye III Control menu then Enable Network
Upgrade Control .
Note: To enable the Network Upgrade user has to change the security level to administrator by logging in
as Administrator.
2) Open the Tupgrade application software and click on the Discover icon. If no RemotEye units auto
populate the list, press on the + icon and enter the IP, Username, and Password. If it still does not appear
check your network security and your computer firewall.
3) Select the check box right next to the RemotEye that will be updated.
4) Select the Edit button and enter the Username and Password.
5) Select the Open File button and select the firmware to be uploaded.
6) Select the Upgrade Firmware button to start the upgrade process.
Figure 63: Tupgrade Utility – Opening Display
Table 4: Tupgrade Toolbar Functions
Toolbar ID Icon Name Description/Function
1 Set IP Manually set found device IP address, subnet mask and gateway
2 Acquire Get all device parameters. This generates a config file.
3 Browse Use default browser to open homepage of selected device
4 Add Pop-up Add dialog to add one device
5 Delete Delete one or more selected devices.
6 Edit Pop-up Edit dialog to modify a device configuration.
7 Discover Discover all RemotEye devices on the network.
8 Open file Open the location (directory) of uploaded file.
9 Upgrade Firmware Upgrade firmware after unit selected and file uploaded