110
RemotEye III User Manual – 62330-005
Execution
After successful installation of the program, users can use the uGuard.sh script to perform the following action.
Usage: ./uGuard.sh -[h][v][s][S][u][U][d][l][e][g] where
h: This manual page.
v: Show revision information.
s: Start the program now.
S: Start the program at next boot up time.
u: Unload program.
U: Unload program, don’t restart at next boot time.
d: Suspend program.
l: List configurations.
e: Modify configurations.
g: See log [/var/log/usha/ug_usha.log].
Configuration
In this phase, users are able to change the parameters for the program. Users can change the setting to fit their needs
at any time by executing “uGuard.sh –e”. After the first configuration process, this phase will show the last setting
value as a default setting.
Input USHA IP Address:
Input Client Name:
Warning Beep On? [y/n]
Shutdown delay time is 120 seconds?[y/n]
If “n” is selected,
Input shut down delay time:
Shut down script is loaded?[y/n]
If “n” is selected,
Input shut down script:
Force shut down delay time is 120 seconds?[y/n]
If “n” is selected,
Input force shut down delay time:
Shut Down Enable?[y/n]
Summary of Contents for RemotEye III
Page 1: ... ...
Page 117: ...116 RemotEye III User Manual 62330 005 Figure 62 RemotEye Save Log Utility Set Page ...
Page 166: ......
