84
RemotEye III User Manual – 62330-005
General Records
This page lists the fundamental UPS parameters. Consolidation intervals may be changed by the administrator by
modifying the variable General Records Log Frequency from the RemotEye III Configuration page (See “RemotEye
III General Records Logs Frequency (secs)” on page 78). The existing values are overwritten when the maximum
number of entries has been reached. The log data may be cleared from the Clear & Save Log Data menu (See “Clear
& Save Log Data” on page 90).
General Records Log Index Page
This index lists the system status records as a series of blocks each containing up to 32 records. Each block is named
“From (date) (time) To (Date) (Time).” The RemotEye will record up to a maximum of 1870 records, and then each
additional new record will replace the oldest stored General Record.
Click on any index listing to see the UPS History Log Data Table for that period.
The 1600XP General Records Log Data Table has the following headings:
•
Log Date (mm/dd/yyyy) - This field shows the date of the recording
•
Log Time - This field shows the time that the values were recorded. Time is displayed in the hh:mm:ss 24-
hour format (i.e., 8:30 p.m. is 20:30:00).
•
Input Voltage (V)
•
Input Frequency (Hz)
•
Output Voltage (V)
•
Battery Voltage (Vdc)
•
Output Status
•
Output Frequency (Hz)
•
Output Current (Amps)
The 4200FA/4300 General Records Log Data Table has the following headings:
•
Log Date (mm/dd/yyyy) - This field shows the date of the recording
•
Log Time - This field shows the time that the values were recorded. Time is displayed in the hh:mm:ss 24-
hour format (i.e., 8:30 p.m. is 20:30:00).
•
Input Voltage (V) (V1, V2, V3)
•
Input Power (%)
•
Output Voltage (V) (V1, V2, V3)
•
Battery Voltage (Vdc)
•
Output Status
•
Output Power Total (%)
•
Output Current Total (%)
Test Records (Applicable to 1600XP Only)
This table lists the detail history of test that has occurred on the UPS. The Log can store a maximum of 680 records.
If more events are recorded, the new record replaces the oldest record.
1.
Log Date – This field shows the date of the recording.
2.
Log Time - This field shows the time that the values were recorded. Time is displayed in the hh:mm:ss 24-
hour format (i.e., 8:30 p.m. is 20:30:00).
3.
Record Number - Maximum number of records is 255.
Summary of Contents for RemotEye III
Page 1: ... ...
Page 117: ...116 RemotEye III User Manual 62330 005 Figure 62 RemotEye Save Log Utility Set Page ...
Page 166: ......
