Toshiba RemotEye III User Manual Download Page 44

Page: 44 / 167

RemotEye III User Manual – 62330-005

This web page allows the user to retrieve the UPS identification and revision information.

Parameter #











UPS Installation Date

This field shows the date the
UPS was installed. For
configuration, refer to the UPS
Configuration menu.



UPS System Name

This field shows the
administrator-configured name
of the UPS. For configuration,
please refer to UPS



UPS Attached Devices

This field shows the
administrator configured
description of the load devices
that attached to the UPS (e.g.
computers, communication
devices, etc). For configuration,
please refer to UPS
Configuration menu.



UPS Hardware Build Date

This field shows the date the
UPS was built. This is for
informational purpose.





UPS EEPROM Version

This field shows the present
EEPROM version for the UPS.
This is for informational





UPS Job Number

This field shows the present job
number for the UPS. This is for
informational purpose.





UPS Test Date

This field shows the date the
UPS was last tested. This is for
informational purpose.





UPS Main Boot Sector Version

This field shows the present
boot sector version for the UPS.
This is for informational
purpose.





UPS Main Boot Loader Version

This field shows the present
boot loader version for the UPS.
This is for informational





UPS Serial Number

This field shows the UPS
manufactured serial number for
the UPS which RemotEye III is
presently attached.



UPS Main Firmware Version

This field shows the present
firmware version for the UPS.
This is for informational





UPS Typeform

This field shows the typeform of
the UPS to which RemotEye III is
presently attached.



UPS Description

This field shows the model
description of the UPS to which
RemotEye III is presently
attached.



UPS Data General Parameters

UPS Manufacture

This field shows the name of the
UPS manufacturer.



Object

Description

1600XP

4200FS

4300



Summary of Contents for RemotEye III








































































































































































Search results

Summary of Contents for RemotEye III

Reviews:

Related manuals for RemotEye III

Brands by name

Popular brands

Toshiba RemotEye III, User Manual

Search results

Summary of Contents for RemotEye III

Reviews:

Related manuals for RemotEye III

Brands by name

Popular brands