Thermo Scientific Micro-Tech 9101, Reference Manual

Page: 226 / 329

B-54 Micro-Tech 9101/9201 Reference Manual, Rev J Thermo Fisher Scientific
No. Parameter Selection Description
4 Word length port
#1 8, 7
5 Protocol port #1 Modbus*, Siemens 3964R*, Allen
Bradley DF1*, Printer *These options are only available when
Printer is selected from Protocol port
#2.
5A Clear to send #1 Disabled, enabled Note: This scroll is not available when
Printer is selected for Protocol port #1.
6 Address port #1 1 (1 - 255) Note: This scroll is not available when
Printer is selected for Protocol port #1.
7 Acces prot port #1 None, limited, protected Note: This scroll is not available when
Printer is selected for Protocol port #1.
8 Baud Rate port #2 9600, 19200, 110, 150, 300, 600,
1200, 2400, 4800 Note: Only available when COMM
board is installed.
9 Set parity port #2 No Parity, even parity, odd parity Note: Only available when COMM
board is installed.
10 Stop bits port #2 1, 2 Note: Only available when COMM
board is installed.
11 Word length port
#2 8, 7 Note: Only available when COMM
board is installed.
12 Protocol port #2 Printer, Modbus*, Siemens*, A/B
DF1* Note: This scroll is only available when
COMM board is installed.
*These options are only available when
Printer is selected from Protocol port
#1
12A Clear to send #2 Disabled, Enabled Note: This scroll is not available when
Printer is selected for Protocol port #2.
13 Address port #2 1 (1 - 255) Note: This scroll is not available when
Printer is selected for Protocol port #2.
14 Acces prot port #2 none, limited, protected Note: This scroll is not available when
Printer is selected for Protocol port #2.
15 Half duplex delay 0 msec (0 - 50 msec) Note: This scroll is only available when
a protocol other than Printer is selected
for either Protocol port #1 or Protocol
port #2.