Thermo Scientific Micro-Tech 9101, Reference Manual

Page: 65 / 329

Initializing the Micro-Tech
Initializing the Software
Thermo Fisher Scientific Micro-Tech 9101/9201 Reference Manual, Rev J 2-25
This menu allows you to choose the rate units used by the Micro-Tech.
Clearly, which rate units are available in this menu depends on the
choices you made in previous menus (English, Metric, Mixed).
The Micro-Tech display should currently look like this, if you chose
English units.
1. Standard U.S. tons (equivalent to British “short tons”) per hour
(“Tph”) is the default value.
2. Repeatedly press the Choice button to select other rate units (shown
below), then press the Enter button.

“LTph”—Long tons per hour

“Lb/mn”—Pounds per minute

“T/mn”—Standard tons per minute

“Lt/mn”—Long tons per minute

“percent %”

“Lb/hr”—Pounds per hour
3. Press the down-arrow button to bring up the load-cell units screen
(go to page 2-25).
Setting the Rate
Units
English Rate Units
BATCH
- DISPLAY SCROLL 4 -
Rate Units
> Tph <
READY ALARM CALIB
CHOICE