Thermo Scientific Micro-Tech 9101, Reference Manual

Page: 218 / 329

B-46 Micro-Tech 9101/9201 Reference Manual, Rev J Thermo Fisher Scientific
No. Parameter Selection Description
3 Analog input #2
def. Off, Inclin., moisture “
3A “ “
3B “ “
4 Analog input #3
def. Off, Inclin., moisture “
4A “ “
4B “ “
5 Analog input #4
def. Off, Inclin., moisture “
5A “ “
5B “ “
6 Dig. Input def. Ext alarm 1 0 NO The NC/NO key selects the
Normally Open (NE) or Normally
Closed (NC) status of the input.
By assigning a function to 0, the
function is disabled.
*The “CommA Scroll 5” (Protocol
port #1) must be set to Printer, or
a COMM board must be installed
for this option to be shown.
Ext alarm 2 0 NO
Ext alarm 3 0 NO
Print* 0 NO
Belt running 0 NC
Reset total 0 NO
Reset alarm 0 NO
Auto zero 0 NO
Clip detect 0 NO
7 Dig. output def.
Alarms 0 NC The NC/NO key selects the
Normally Open (NO) or Normally
Closed (NC) status of the input.
By assigning a function to 0, the
function is disabled.
Shut down 0 NC
Ready 0 NO
High load
1
0 NO