Thermo Scientific Micro-Tech 9101, Reference Manual

Page: 222 / 329

B-50 Micro-Tech 9101/9201 Reference Manual, Rev J Thermo Fisher Scientific
No. Parameter Selection Description
3B High speed set
___ ___ 100% (0 - 150%)
10 sec (0 - 90 sec)
600 FPM (0 - 900 FPM)
Alarm Number
Alarm
Number Description Selection Description
#1 Clock Fail ALARM, SHUT DOWN, AUTO
RES., NONE The system has detected a
failure on the clock calendar
circuit. Go to the Diagnostics
menu and re-enter the date
and time. Check the battery.
Replace the motherboard.
#3 Signal cell fail S1 ALARM, SHUT DOWN, AUTO
RES., NONE
#4 Signal cell fail S2 ALARM, SHUT DOWN, AUTO
RES., NONE
#7 RAM fail ALARM, SHUT DOWN, AUTO
RES., NONE The system has detected an
error on the RAM (Random
Access Memory) checksum
during the internal periodic
test. The RAM is used to
store variables and set up
data.
Replace the motherboard.
#8 ROM fail ALARM, SHUT DOWN, AUTO
RES., NONE The system has detected an
error on the ROM (Read Only
Memory) checksum during
the internal periodic test. The
ROM is used to store the
program.
Replace the motherboard.
#10 High load ALARM, SHUT DOWN, AUTO
RES., NONE Only present when Load
alarm is set to Yes.
#13 Low load ALARM, SHUT DOWN, AUTO
RES., NONE Only present when Load
alarm is set to Yes.
#16 High rate ALARM, SHUT DOWN, AUTO
RES., NONE Only present when Rate
alarm is set to Yes.
#19 Low rate ALARM, SHUT DOWN, AUTO
RES., NONE Only present when Rate
alarm is set to Yes.
#22 High speed ALARM, SHUT DOWN, AUTO
RES., NONE Only present when Speed
alarm is set to Yes.
#25 Low speed ALARM, SHUT DOWN, AUTO
RES., NONE Only present when Speed
alarm is set to Yes.