Thermo Scientific Micro-Tech 9101, Reference Manual

Page: 67 / 329

Initializing the Micro-Tech
Initializing the Software
Thermo Fisher Scientific Micro-Tech 9101/9201 Reference Manual, Rev J 2-27
The Micro-Tech display should currently look like this, if you chose
mixed units.
1. Metric tonnes per hour (“t/h”) is the default value.
2. Repeatedly press the Choice button to select other rate units (shown
below), then press the Enter button.

“Lb/h”—Pounds per hour

“Tph”—Standard tons per hour

“LTph”—Long tons per hour

“kg/mn”—Kilograms per minute

“t/mn”—Metric tonnes per minute

“Lb/mn”—Pounds per minute

“T/mn—Standard tons per minute

“LT/min”—Long tons per minute

“percent %”

“kg/h”—Kilograms per hour
3. Press the down-arrow button to bring up the load-cell units screen
(see the next section).
Mixed Rate Units
BATCH
- DISPLAY SCROLL 4 -
Rate Units
> t/h <
READY ALARM CALIB
CHOICE