DOCUMENT No.:
REVISION: 1.2
DATE: 2014/11/10
DC-MAM-001-X-C-2
Page 295
11.2.3 LANDING AND / OR TAXI LIGHT ADJUSTMENT
TOOLS / EQUIPMENT REQUIRED
ITEM
QUANTITY
NOTES
1
2.5 mm Allen key / hex drive.
1
2
Phillips screwdriver.
1
The above list is not necessarily a complete list of all required tools and equipment needed. A calibrated torque
wrench (with adequate range) and the correct size (as implied by the above tool list) accessories (sockets etc.)
are implied for torqueing bolts / nuts, if applicable. Refer to paragraph 1.5 for torque values.
AUTHORISED PERSONNEL
Any person performing maintenance of any kind on the aircraft or any component thereof must do so in
accordance with national legislation. This is the responsibility of the aircraft owner and any person who is to
perform any maintenance on the aircraft.
PROCEDURE
1.
Undo the screws retaining the clear lens to the wing and remove the lens.
2.
Adjust the light angle in azimuth and elevation by independently adjusting each button head
screw until the desired result is attained.
3.
Replace the lens.
Summary of Contents for Sling 4
Page 1: ......
