DOCUMENT No.:
REVISION: 1.2
DATE: 2014/11/10
DC-MAM-001-X-C-2
Page 184
PROCEDURE (REMOVAL)
Retain any bolts, clamps, spacers, screws and washers (with the exception of lock-washers) for
reassembly.
1. Remove the engine cowling (refer to paragraph 5.1.1).
2. Loosen the clamp (1) retaining the air pipe (2) to the assembly shroud (3).
3. Loosen and remove the ring clamp (4) retaining the exhaust pipe to the engine mount. Undo and
remove the bolts (5) retaining the assembly to the turbocharger. Loosen and remove the clamp
(6) retaining the assembly to the mounting bracket (7).
4. Remove the assembly.
PROCEDURE (INSTALLATION)
1. Reverse the above procedure (removal), paying close attention to the following:
Do not over tighten clamps.
5
1
5
5
1
1
1
2
1
4
1
6
4
1
7
1
3
1
2
1
4
1
Summary of Contents for Sling 4
Page 1: ......