DOCUMENT No.:
REVISION: 1.2
DATE: 2014/11/10
DC-MAM-001-X-C-2
Page 183
5.2.8
MUFFLER / HEAT EXCHANGER ASSEMBLY REMOVAL / REPLACEMENT
TOOLS / EQUIPMENT REQUIRED
ITEM
QUANTITY
NOTES
1
½ inch Spanner.
1
2
10 mm Spanner.
1
3
9 mm Spanner.
1
4
Flat screwdriver.
1
The above list is not necessarily a complete list of all required tools and equipment needed. A calibrated torque
wrench (with adequate range) and the correct size (as implied by the above tool list) accessories (sockets etc.)
are implied for torqueing bolts / nuts, if applicable. Refer to paragraph 1.5 for torque values.
AUTHORISED PERSONNEL
Any person performing maintenance of any kind on the aircraft or any component thereof must do so in
accordance with national legislation. This is the responsibility of the aircraft owner and any person who is to
perform any maintenance on the aircraft.
WARNING
MASTER / IGNITION SWITCHES OFF.
WARNING
ALLOW THE ENGINE AND APPLICABLE COMPONENTS TO COOL COMPLETELY BEFORE
PERFORMING ANY WORK OR INSPECTION IN THE ENGINE COMPARTMENT. HOT ENGINE
COMPONENTS CAN CAUSE SERIOUS BURNS AND CAN IGNITE SPILLED FLUID / VAPOUR.
Summary of Contents for Sling 4
Page 1: ......