DOCUMENT No.:
REVISION: 1.2
DATE: 2014/11/10
DC-MAM-001-X-C-2
Page 58
LUBRICATION:
Periodic lubrication of moving parts ensures proper operation and extends part lifetimes
considerably.
Avoid excessive lubrication as this may cause external surfaces of hinges and bearings to
collect dirt and dust.
If a part is lubricated by hand, remove excess grease.
MOVING PARTS
:
Lubricate as required with the correct lubricant, as specified for the part.
COMPOSITE PARTS:
Repair cracks, dents and delamination as necessary.
FLUID LINES, HOSES, TUBES AND CONNECTIONS:
Fluid lines should be replaced with lines of the same part number, material, size (inner and
outer diameter), pressure rating and length (of the line to be replaced).
Allow enough slack in flexible hoses for stretch when pressure is applied / removed.
Do not twist flexible hoses and metal lines.
Metal end fittings should not be considered as part of the flexible section of a flexible hose.
Keep the bend radius of installed flexible hoses as large as possible to avoid collapse.
When installing seals into end fittings, ensure that the seal is not scratched, cut or
damaged.
Summary of Contents for Sling 4
Page 1: ......
