DOCUMENT No.:
REVISION: 1.2
DATE: 2014/11/10
DC-MAM-001-X-C-2
Page 218
PROCEDURE (DISASSEMBLY)
Retain any bolts, nuts (except lock-nuts) spacers, screws and washers (with the exception of lock-
washers) for reassembly.
1. Remove the spinner dome (refer to paragraph 5.3.3).
2. Remove the propeller assembly from the aircraft (refer to paragraph 5.3.4).
3. Unfasten the bolts (1) that secure the propeller assembly (2) to the propeller extension (3) and
remove the propeller and spinner bulkhead.
4. For further disassembly of the propeller assembly (2) refer to the latest revision of the propeller
manufacturer operator
’s manual for the required procedures and instructions.
PROCEDURE (ASSEMBLY)
1. Reverse the above procedure (disassembly) to reassemble the propeller assembly, paying close
attention to the following:
Do not reuse lock-washers. Fit new.
Inspect all bolts, nuts and screws for damage, cracks, corrosion, proper thread and
cleanliness. Replace if necessary.
Apply Loctite 222 to the bolts before fitting to the spacer / propeller assembly.
1
5
1
5
1
5
3
5
2
5
2
Summary of Contents for Sling 4
Page 1: ......
