DOCUMENT No.:
REVISION: 1.2
DATE: 2014/11/10
DC-MAM-001-X-C-2
Page 146
PROCEDURE (REMOVAL)
Retain any bolts, nuts (except lock-nuts) spacers, screws and washers (with the exception of lock-
washers) for reassembly.
1. Remove the inside half (1) of the fairing by unscrewing all button head screws (2) that hold the
fairing to the support plate and hold the inner and outer fairing sections to one another.
2. Support the outside fairing half (3) and unfasten the retaining bolt (4). Remove the fairing half,
bolt and washers (5).
PROCEDURE (INSTALLATION)
1. Reverse the above procedure for installation, paying careful attention to the following:
Avoid damage to the fibreglass fairing(s) and rivnuts by not tightening the button head
screws excessively.
Apply thread locking sealant to the fairing screws and the retaining bolt before fitting.
4, 5
3
1
2
2
Summary of Contents for Sling 4
Page 1: ......